VINITEX WS 1.2 is an non-reinforced flexible PVC membrane which is 1.2 mm thick.

Water-proofing reservoirs, ponds or channels, suitable for outdoor use.

• Membrane made exclusively from virgin resins.
• Very long-lasting.
• Highly puncture resistant.
• Excellent stability under UV radiation.
• Excellent adaptability to the land
• Excellent mechanical properties
• Easily welded using hot air, even several years after installation.
• Resistant to micro-organisms.

• VINITEX WS 1.2 waterproofing systems must be installed by experienced and qualified personnel.
• Surfaces must be clean and dry and free from sharp obtrusions. The membrane can be used on bitumen, asphalt, oil and tar surfaces and polyurethane and polystyrene isolation by using a suitable geotextile as a separating layer.
• Membrane joins should be made using a hot air welder and should be checked by running a flat headed punch along the whole of the seam.
• Before starting welding adjust the parameters for speed and temperature according to the ambient conditions and the surfaces of the membrane.