TEXSA SYNTHETICS Gama de productos

AUXILIARY: PVC VINITEX
		Vinitex Desagüe + Paragravillas Vinitex Gárgola Vinitex Esquina Vinitex Rincón Vinitex Colaminado - Plancha Vinitex Colaminado - Tira Barra de Terminación Vinitex Adhesivo soporte Vinitex Líquido Rodillo de Presión en Silicona


AUXILIARY: TPO TEXSALON
		Texsalón Desagüe Texsalón Gárgola Texsalón Terminación Texsalón Esquina - Rincón Texsalón Colaminado - Plancha Texsalón Barra de terminación Texsalón Refuerzo Sellador de Borde Transparente Texsalón Adhesivo de Soporte Rodillo de Presión en Silicona


AUXILIARY: EPDM SURE-SEAL
		Sure-Seal Pressure-Sensitive SecurTAPE Sure-Seal HP-250 Primer Sure-Seal Pressure-Sensitive Elastoform Flashing Sure-Seal Pressure-Sensitive Russ Wearhered Membrane Cleaner Sure-Seal Splicing Cement In Seam Sealant 1124 Sure-Seal Lap Sealant Sure-Seal Flashing Sure-Seal Russ EPDM Desagüe - Paragravillas Sure-Seal Bonding Adhesive 90-8-30A EPDM Barra de Terminación Water Cutoff Mastic Pourable Sealer Rodillo de Terminación Metálico Rodillo Aplicación Adhesivo Mango Aplicación Adhesivo

AUXILIARY PRODUCTS

Vinitex Desagüe + Paragravillas D90 mm

vinitex gáragola

Vinitex Gárgola 90º D63 mm

Vinitex Esquina

Vinitex Rincón

vinitex colaminado plancha

Vinitex Colaminado - Plancha

vinitex colaminado tira

Vinitex Colaminado - Tira

Vinitex Adhesivo
Soporte

Vinitex Líquido

Vinitex MP 1.2

(PDF) Download Print version

DESCRIPTION
VINITEX MP 1.2 is a flexible PVC-P vinyl membrane which is 1.2 mm thick and is reinforced with a polyester mesh.

APPLICATIONS
VINITEX MP 1.2 is suitable for waterproofing roofs, ballasted system and mechanically-fastened system both in new construction and reconditioning.

PROPERTIES

• VINITEX MP 1.2 meets the requirements of EN 13956 standar specification. Certificate CE nº 0099/CPD/A85/0037.
• Membrane made exclusively from virgin resins.
• Extremely long-lasting.
• Highly puncture resistant.
• Excellent stability under UV radiation.
• Excellent mechanical properties.
• High resistance to laceration.
• Easily welded using hot air, even several years after installation.
• Can be recycled.
• Excellent flexibility at low temperatures.

INSTALLATION

• VINITEX MP 1.2 waterproofing systems must be installed by experienced and qualified personnel.
• Surfaces must be clean and dry and free from sharp obtrusions. The membrane can be used on bitumen, asphalt, oil and tar surfaces and polyurethane and polystyrene isolation by using a suitable geotextile as a separating layer.
• The membrane is laid flat without creases and fixed to the support surface.
• Membranes should be joined using hot air welding so giving a double-thickness seam for mechanical fixing.
• Before starting welding adjust the parameters for speed and temperature according to the ambient conditions and the surfaces of the membrane.

PACKAGING AND STORAGE
Colours	Grey, Dark grey
Dimensions	2,05 x 20 m (41 m2 / roll) - 1.04 x 30 m (31.2 m2 / roll)
Rolls / pallet	18 - 15
Storage	Horizontally and in parallel (never crossed)

Supplied in rolls on cardboard tubing.
Store in the original packaging in a dry and cool place.

SPECIFICATIONS	Test method	Unit	Vinitex MP 1.2
External fire behaviour	prEN 13501-5	-	Broof (t1) / Broof (t3)
Reaction to fire	EN 13501-1:2002 (EN ISO 11925-2)	-	E
Watertightness	EN 1928:2000 (B)	-	Pass
Tensile strenght to Break	EN 12311-2	N/50mm	>= 1100 x1000
Elongation at Break	EN 12311-2	%	>= 20
Static puncture resistance	EN 12730 (A)	Kg	25
Impact resistance	EN 12691	mm	≥ 500 (Hard Substrate) ≥ 700 (Soft. Substrate)
Tear resistance	EN 12310-2	N	>= 200
Joint separation resistance	EN 12316-2	N/50 mm	>= 200
Joint shear resistance (L x T)	EN 12317-2	N/50 mm	>= 1000 x 1000
Artificial aging due to Prolonged exposure to UV radiation, High temperatures and water	EN 1297	Visual	Pass
Flexibility under low temperatures	EN 495-5	ºC	<= -25

OTHER SPECIFICATIONS	Test method	Uniy	Value
Visible defects	EN 1850-2	-	Pass
Length	EN 1848-2	m	20
Width	EN 1848-2	m	2
Straightness	EN 1848-2	mm	<= 50
Mass per unit area	EN 1849-2	kg/m2	1.56
Thickness	EN 1849-2	mm	1.2
Flatness	EN 1848-2	mm	<= 10
Dimensional stability	EN 1107-2	%	<= 0.3
Water vapour transmission properties	EN 1931	µ	20,000

TEXSA SYNTHETICS, S. A. reserves the right to modify information without prior warning and will not take responsibility for anomalies caused by incorrect use of the product. The values shown in the technical sheets are the average values resulting from tests carried out in our laboratory.

Last updated: 31/1/2009


SITE MAP	LEGAL NOTE	LINKS	Copyright © 2007 TEXSA S.A, \| design and development: asensio comunicació visual