AUXILIARY: PVC VINITEX

Vinitex Desagüe + Paragravillas
Vinitex Gárgola
Vinitex Esquina
Vinitex Rincón
Vinitex Colaminado - Plancha
Vinitex Colaminado - Tira
Barra de Terminación
Vinitex Adhesivo soporte
Vinitex Líquido
Rodillo de Presión en Silicona
  AUXILIARY: TPO TEXSALON
   
Texsalón Desagüe
Texsalón Gárgola
Texsalón Terminación
Texsalón Esquina - Rincón
Texsalón Colaminado - Plancha
Texsalón Barra de terminación
Texsalón Refuerzo
Sellador de Borde Transparente
Texsalón Adhesivo de Soporte
Rodillo de Presión en Silicona
  AUXILIARY: EPDM SURE-SEAL
   
Sure-Seal Pressure-Sensitive     SecurTAPE
Sure-Seal HP-250 Primer
Sure-Seal Pressure-Sensitive     Elastoform Flashing
Sure-Seal Pressure-Sensitive     Russ
Wearhered Membrane Cleaner
Sure-Seal Splicing Cement
In Seam Sealant 1124
Sure-Seal Lap Sealant
Sure-Seal Flashing
Sure-Seal Russ
EPDM Desagüe - Paragravillas
Sure-Seal Bonding Adhesive
    90-8-30A

EPDM Barra de Terminación
Water Cutoff Mastic
Pourable Sealer
Rodillo de Terminación Metálico
Rodillo Aplicación Adhesivo
Mango Aplicación Adhesivo
Water Cut-off Mastic

Water Cut-off Mastic

 
(PDF) Download Print version
 
 
DESCRIPTION
Water Cut-Off Mastic is a one-component, low viscosity, self-wetting, butyl blend mastic designed to be used in conjunction with roofing and waterproofing systems. It is primarily used as a sealing agent between various membranes and applicable when membrane is being terminated using a compression type seal.
Water Cut-Off Mastic is an extremely tacky material and will remain as such when used with compression type terminations.
 
PACKAGING AND STORAGE

Colour

Gray

Solids

80%

Flash Point

4 ºC Closed Cup

Service Temperature

-40 ºC to 93 ºC

Net Weight Per Gallon

4.5 - 5.0 Kg

Specific Gravity

1.20 - 1.32

Viscosity, Brookfield

800,000 - 1,800,000 cps

Cold Weather Flex

Excellent

Packaging

10 Tubes/Carton

Clean up

Weathered Membrane Cleaner

Shelf Life

1 Year, unopened container


 
APPLICATION **
1. All surfaces to be sealed with Water Cut-Off Mastic must be a masonry, metal or glass substrate and free of moisture, oil, dirt and other foreign materials.
2. Apply a 7/16" (11 mm) bead of Water Cut-Off Mastic between the substrate and the edge of the membrane.
3. Apply appropriate termination material and secure to provide constant compression for the Water Cut-Off Mastic.

* General properties. Typical properties and characteristics are based on samples tested and are not guaranteed for all samples of this product. This data and information are intended as a guide and do not reflect the specification or specification range for any particular property of this product.
** REVIEW CURRENT CARLISLE SPECIFICATIONS AND DETAILS FOR SPECIFIC
APPLICATION REQUIREMENTS.

Coverage: 10' (3 m) per tube or 128' (39 m) per gallon using a 7/16" (11 mm) bead.

 
CAUTIONS AND WARNINGS
1. Review the applicable Material Safety Data Sheet for complete safety information prior to use.
2. Water Cut-Off Mastic is FLAMMABLE - It contains solvents that are dangerous fire and explosion hazards when exposed to heat, flame or sparks. Store and use away from all sources of heat, flame or sparks. Do not smoke while applying. Do not use in a confined or unventilated area. Vapors are heavier than air and may travel along ground to a distant ignition source and flash back. A red caution label is required when shipping.
4. Avoid breathing vapors. Keep container closed when not in use. Use with adequate ventilation. If inhaled, remove to fresh air. If not breathing, perform artificial respiration. If breathing is difficult, give oxygen. Call a physician immediately.
5. If swallowed, DO NOT INDUCE VOMITING. Call a physician immediately.
6. Avoid contact with eyes. Safety glasses or goggles are recommended. If splashed in eyes, immediately flush eyes with plenty of clean water for at least 15 minutes. Contact a physician immediately.
7. Avoid contact with skin. Wash hands thoroughly after handling. In case of contact with skin, thoroughly wash affected area with soap and water.
Note: Carlisle's special solvent resistant Hycron gloves are recommended to be worn when using this product to protect hands from irritating ingredients.
8. DO NOT USE as splice cement or as an external sealant.
9. Job site storage temperatures in excess of 90 ºF (32 ºC) may affect product shelf life. Should the Water Cut-Off Mastic be stored at temperatures below 60 ºF (15 ºC), restore to room temperature prior to use.
10. If applied during periods of cold, dampness or high humidity, it is possible that the evaporation of solvents will be substantially reduced, resulting in some slight membrane swelling. This would be further aggravated should the mastic be applied in an unusually heavy coat.
11. KEEP OUT OF THE REACH OF CHILDREN.


Last updated: 25/3/08  




SITE MAP LEGAL NOTE LINKS    
Copyright © 2007 TEXSA S.A, | design and development: asensio comunicació visual